How to Update Galaxy S4 I9500 to Android 4.2.2 XXUBMG9 Official Firmware. This newofficial firmware can be downloaded from Samsung KIES, or several of you would have already got an OTA update directly on your phone. For those who haven’t, you can now grab this download manually. You can easily update Galaxy S4 I9500 to XXUBMG9 Android 4.2.2 Jelly Bean officialfirmware — and for those who have already updated, you can root this firmware. Please note, I9500XXUBMG9 firmware is an official firmware by Samsung, not a custom or modified firmware. This post will guide you on How to Update Galaxy S4I9500 to Android 4.2.2 XXUBMG9 OfficialFirmware.
As you continue reading below, we will guide you on how to install XXUBMG9 Android 4.2.2 Jelly Bean onGalaxy S4 I9500 using ODIN. Make sure to read the entire tutorial first before actually performing it to avoid any confusion. Lets get on with the tutorial.
We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S4 toAndroid 4.2.2 XXUBMG9. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Android 4.2.2 XXUBMG9 Firmware Details:
- PDA: I9500XXUBMG9
- CSC: I9500OJVBMG9
- Version: 4.2.2
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We or the developers are not to be held responsible if you damage or brick your device. Please proceed at your own risk.
Things to Remember:
- This tutorial is only for Samsung Galaxy S4 I9500. Please don’t try this on any other variants of the phone.
- I9500XXUBMG9 is an official firmware by Samsung for the Galaxy S4 I9500.
- Make sure you backup all your data in your phone before proceeding.
- Double check and read the tips on the previous page once again to make sure everything is in order.
- Make sure USB Drivers are installed properly on your Computer.
How to Update Galaxy S4 I9500 to Android 4.2.2 XXUBMG9 Official Firmware:
Required Files:
Step 1 – Extract the zip file you downloaded before (I9500XXUBMG9_I9500OJVBMG9_XSG.zip).
Step 2 – Switch OFF your phone. Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 3 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 4 – If your phone is connected successfully, one of the ID:COM boxes will change color with the COM port number as you can see in the image below. This step might take some time.
Step 5 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘PDA’ and select file with ‘CODE’ in its name.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 6 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 7 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 8 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S4 has now been updated to Android 4.2.2 build XXUBMG9 firmware update. Go to “Settings > More > About phone” to verify.
First Source Link http://howto-use.info/2013/12/02/how-to-update-galaxy-s4-i9500-to-android-4-2-2/
0 comments:
Post a Comment